Peerless Industries A100IWBMOUNT - Manual (Page 11)

ISSUED: 04-08-08 SHEET #: 055-9094-2 06-06-08
Visit the Peerless Web Site at www.peerlessmounts.com For customer care call 1-800-865-2112 or 708-865-8870.
11 of 16
Hook brackets (E) into adapter plate (D) as shown in fig. 8.1 and
detail 4. The hooks will go over the flange on the top and the bottom of
hook bracket (E) into the slots as shown in detail 4 and detail 6. Fasten
#10-32 x 1-3/8" socket pin screws (T) on each hook bracket (E), using
security allen wrench (V) and tighten to wall plate as shown in
detail 5.
To remove screen from mount, loosen safety/security screws and lift screen
off of mount.
• Do not tighten screws with excessive force.
Overtightening can cause damage to mount. Tighten
screws to 40 in. • lb (4.5 N.M.) maximum torque.
CAUTION
8
SIDE VIEW
fig 8.1
DETAIL 4
DETAIL 5
E
T
D
E
D
E
D
CONNECTION
BLOCK
CAPTIVE
SCREW
Disengage connection block from projector mount assembly (J) by unscrewing captive screw and sliding out
connection block as shown.
J
9
DETAIL 6
fig 8.2
HOOK
FLANGE
BOTTOM OF HOOK
BRACKET (E)
D