Peerless Industries A100IWBMOUNT User Manual
Page 14
ISSUED: 04-08-08 SHEET #: 055-9094-2 06-06-08
Visit the Peerless Web Site at www.peerlessmounts.com
For customer care call 1-800-865-2112 or 708-865-8870.
14 of 16
PROJECTOR
Attach adapter plate (H) to projector using
four M6 x 12 mm serrated washer head
socket pin screws (L) and 0.25" spacers (M).
NOTE: Shoulder of connection block indi-
cates the back of projector. The screws (L)
should be placed in the center of slots. This
can be adjusted during final projector
alignment if needed.
SHOULDER
CONNECTION
BLOCK
CONNECTION
BLOCK
NOTCH INDICATES
FRONT OF
PROJECTOR
SHOULDER
Attaching Adapter Plate to Projector
Align shoulder on connection block opposite notch in
adapter plate (H). Attach adapter plate (H) to
connection block from projector mount assembly (J)
using two #10-32 x 3/8" serrated washer head socket
pin screws (O).
H
L
M
H
O
12
13