Peerless Industries A100IWBMOUNT - Manual (Page 9)

ISSUED: 04-08-08 SHEET #: 055-9094-2 06-06-08
Visit the Peerless Web Site at www.peerlessmounts.com For customer care call 1-800-865-2112 or 708-865-8870.
9 of 16
Fasten two #10-32 x 0.375" phillips screws (K) into adapter plate (D) leaving three threads exposed as shown in
detail 1. Hook each vertical handle (F) onto #10-32 x 0.375" phillips screw (K) as shown in fig 5.1. NOTE: Use top
slot for 77" screen or second slot from top for 63" screen. Fasten #10-32 x 0.375" phillips screws (K) through lower
slot of vertical handle (F) that lines up with the lower hole in
adapter plate (D). Hole location for 77" screen is shown
in fig. 5.2. Securely tighten all four #10-32 x 0.375" phillips screws (K).
5
F
D
THREE THREADS
EXPOSED
DETAIL 1
K
D
K
F
fig. 5.1
fig. 5.2
6
63" SCREEN
77" SCREEN
Fasten horizontal handle (G) to vertical handle (F) using four #10-32 x 0.375" phillips
screws (K) and two acorn nuts (R).
R
G
F
K
K
NOTE: 77" hole location
shown. 63" will use second
from bottom hole on
vertical
handle (F).
CABLES ROUTING THROUGH THE TUBE
CAN BE PULLED TAUGHT AND FIXED IN
LINE TO THE HORIZONTAL HANDLE(G) BY
USING CABLE TIES (Z). USE OTHER CABLE
TIES AS NEEDED.
K