Panasonic KX-TA624 - Manual (Page 161)

Telephone Features 3-105
3.2 Telephone Features
R
Conditions
• The doorphone access tone can be disabled by System Programming.
• The access tone will not be sent to the monitored PT.
The paging access tone will also not be sent to the monitored PT.
• System Programming is required to monitor through a PT.
• This feature is not available for the KX-T7050 and KX-T7055.
Programming References
• System Programming — Installation Manual
[612] Room Monitor Assignment
[707] Doorphone Access Tone Selection
PT
PT
PT
Canceling
PT
Dial 7350#.
7 3 5 0 #
Lift the handset or
press SP-PHONE. Hang up or press
SP-PHONE. Confirmation tone
At the monitored telephone
<PT Display Example>
Room Monitor Off
Monitoring through a doorphone
PT and SLT
For a PT: Press SP-PHONE and AUTO ANSWER/MUTE.
For an SLT: Lift the handset and press the MUTE button. Enter the monitored doorphone
number (1 through 4).
doorphone no. Monitoring starts. 3 1
Dial 31.
SP-PHONE AUTO ANSWER
MUTE
For a PT
MUTE
For an SLT
Canceling a monitor temporarily
PT
Press AUTO ANSWER/MUTE.
AUTO ANSWER
MUTE
At the monitored telephone
• The AUTO ANSWER/MUTE
button indicator turns off.