Panasonic KX-TA624 - Manual (Page 52)

2-24 Station Programming (Personal Programming)
2.2 Station Programming (Personal Programming)
Preferred Line Assignment — Outgoing
Allows you to select the desired outgoing line preference to originate calls from the
following three line preferences.
1.) No Line Preference (— default)
2.) Idle Line Preference
3.) Prime Line Preference
Follow the programming procedure according to your selection.
<Note>
When setting “Idle Line Preference” or “Prime Line Preference”, you cannot access any
PT features after going off-hook. To access these PT features, press the INTERCOM
button before or after going off-hook.
No Line Preference — Outgoing
(Assignment)
When going off-hook, you are not connected to any line. You must choose the line.
— Be sure that you are in the Station Programming mode. Set the MEMORY switch to
“PROGRAM”.
— To exit the Station Programming mode, set the MEMORY switch to “SET”.
PT
Dial 1.
1
Press STORE.
AUTO DIAL
STORE
Dial 1.
1
• The STORE indicator lights.
• The display shows the initial
programming mode.
• The display shows the current
status.
<PT Display Example>
Pref. Out:No