Panasonic KX-TA624 - Manual (Page 63)

Telephone Features 3-7
3.2 Telephone Features
A
Account Code Entry
An account code is used to identify outside calls for accounting and billing purposes. The
account code is appended to the “Station Message Detail Recording (SMDR)” call
record. For incoming outside calls, account codes are not required. For outgoing outside
calls, account codes are often required. You can enter account codes in the following four
modes.
Verify - All mode: You must always enter a pre-assigned account code.
Verify - Toll mode: You can enter a pre-assigned account code so that you can override
toll restriction.
Option mode: An account code can be entered when a record of the account code is
required. It can be any number.
Forced mode: You must always enter an account code. It can be any number.
Making calls with account codes except in the Option mode
PT and SLT
account code
Enter an account
code (4 digits). Dial tone
For a PT: Press FWD/DND or PAUSE.
For an SLT: Dial 49 or . Lift the handset or press
SP-PHONE/MONITOR. Press CO or
enter a line access code
(9 or 81 through 86).
Enter the phone number.
phone no.
line access code
CO
Dial tone 3
For an SLT
For a PT
4 9 or
or
PAUSE FWD/DND
PT
account code
Enter an account code (4 digits). Press FWD/DND.
During a conversation or while hearing a reorder tone after the other party hangs up
(within 30 seconds)
FWD/DND
• You can keep talking.
Making calls with account codes in the Option mode and receiving calls