Panasonic KX-TA624 - Manual (Page 193)

DSS Console Features 4-5
4.2 DSS Console Features
PT and DSS Console
Dial 1. Enter the desired
extension number
(100 through 199).
1 extension no.
Press the desired
DSS button. Press AUTO DIAL/STORE.
AUTO DIAL
STORE
[DSS Console] [Paired telephone] [Paired telephone] [Paired telephone]
Repeat these steps
to program numbers
for other DSS buttons.
PT and DSS Console
Enter the desired
number.
phone no.
Press the desired DSS button (on the DSS
Console) and dial 2 (on the paired telephone),
or press the PF button (on the DSS Console). Press
AUTO DIAL/STORE.
AUTO DIAL
STORE
[DSS Console and Paired telephone] [Paired telephone] [Paired telephone]
Repeat these steps
to program numbers
for other DSS or PF
buttons. 2
PF
+
One-Touch Dialing Assignment
You can assign a DSS or PF button as a One-Touch Dialing button. The number can be
an extension number or a telephone number. Up to twenty-four digits can be stored in
each memory location.
— Be sure that you are in the Station Programming mode. Set the MEMORY switch to
“PROGRAM”.
• When you assign an outside phone number, you must enter a line access code first.
— To exit the Station Programming mode, set the MEMORY switch to “SET”.
— To exit the Station Programming mode, set the MEMORY switch to “SET”.
Extension Number Assignment
You can assign a desired number to a DSS button.
— Be sure that you are in the Station Programming mode. Set the MEMORY switch to
“PROGRAM”.