Planet Technology VRT-401G - Manual (Page 29)

Parameter Description
Set Time Zone
Select the time zone of the country you are currently in.
The router will set its time based on your selection.
Time
Server Address The router default the “Time Server Address” is
“192.43.244.18”
Enable Daylight Savings
The router can also take Daylight savings into account. If
you wish to use this function, you must check/tick the
enable box to enable your daylight saving configuration
(below).
Start Daylight Savings Time
Select the period in which you wish to start daylight
Savings Time
End Daylight Savings Time Select the period in which you wish to end daylight
Savings Time
Click <Apply> at the bottom of the screen to save the above configurations. You can now
configure other advance sections or start using the router (with the advance settings in place)
2.1.2 Password Settings
You can change the password required to log into the VRT-401G's system web-based
management. By default, the password is admin. So please assign a password to the
Administrator as soon as possible, and store it in a safe place. Passwords can contain 0 to 12
alphanumeric characters, and are case sensitive.
29