Planet Technology VRT-401G - Manual (Page 54)

Server Table" below. If you find any typo before adding it and
want to change the setting, just click "Clear" and retype it again..
Remove Virtual Server
If you want to remove some Virtual Server settings from the
"Current Virtual Server Table", select the Virtual Server settings
you want to remove in the table and then click "Delete Selected".
If you want remove all Virtual Server settings from the table, just
click "Delete All" button. Click "Reset" will clear your current
selections.
Click <Apply> at the bottom of the screen to save the above configurations. You can now
configure other advance sections or start using the router (with the advance settings in place)
Example: Virtual Server
The diagram below demonstrates one of the ways you can use the Virtual Server function. Use
the Virtual Server when you want the web server located in your private LAN to be accessible to
Internet users. The configuration below means that any request coming form the Internet to
access your web server will be translated to your LAN’s web server (192.168.2.2). Note: For the
virtual server to work properly Internet/remote users must know your global IP address. (For
websites you will need to have a fixed/static global/public IP address)
54