Planet Technology VRT-401G - Manual (Page 36)

Note: By default the IP range is from: Start IP
192.168.0.100 to End IP 192.168.0.200. If you
want your PC to have a static/fixed IP address
then you’ll have to choose an IP address outside
this IP address Pool.
Domain Name
You can specify a Domain Name for your LAN
Click <Apply> at the bottom of the screen to save the above configurations. You can now
configure other advance sections or start using the router (with the advance settings in place)
2.4 Wireless
Wireless Access Point builds a wireless LAN and can let all PCs equipped with IEEE 802.11b or
801.11g wireless network adaptor connect to your Intranet. It supports WEP and WPA2
encryption to enhance the security of your wireless network.
Parameters Default Description
Enable or disable Enable You can select to enable or disable the wireless
Wireless module access point module of this router.
function
Click <Apply> at the bottom of the screen to save the above configurations. You can now
configure other advance sections or start using the router (with the advance settings in place)
2.4.1 Basic Settings
You can set parameters that are used for the wireless stations to connect to this router. The
parameters include Mode, ESSID, Channel Number and Associated Client.
36