Panasonic KX-HGC200 - Manual (Page 13)

13
For assistance, please call: 1-800-272-7033
Installation
Installing the KX-HGC200 in the
Broadband Networking Gateway
“
Confirming the Broadband Networking
Gateway firmware version
Depending on the firmware version of the Broadband Networking
Gateway, it may not support the KX-HGC200. Before adding the
Broadband Networking Gateway to your wireless network, check your
Broadband Networking Gateway firmware version and, if needed, upgrade
the firmware first.
The steps below are for using the wired computer, not the wireless
computer.
To check the Broadband Networking Gateway firmware
version
1 Access the Broadband Networking Gateway administration web
screen. For more details about accessing the web screen, refer to
the Operating Instructions of the Broadband Networking Gateway.
≥ The default local IP address of the Broadband Networking Gateway is
192.168.0.254.
2 Click [Status] .