Panasonic KX-HGC200 - Manual (Page 14)

14
“ Installing the KX-HGC200 in the Broadband
Networking Gateway
3 In the Firmware section, check the firmware version of your
Broadband Networking Gateway.
If the firmware version is 2.00 or later, the firmware supports the
KX-HGC200 use. Then, go to step 4.
If the firmware version is an earlier version than 2.00, upgrade the
Broadband Networking Gateway firmware. For more details about
upgrading the firmware, see below “To obtain and upgrade the
Broadband Networking Gateway firmware.”
4 Click [Restart] to restart the Broadband Networking Gateway.
To obtain and upgrade the Broadband Networking
Gateway firmware
The Broadband Networking Gateway firmware is available as follows:
≥ Included in the below directory of the CD-ROM that came with the
KX-HGC200
\KX-HGW\hgwxxxx_us.bin (depending on the version number of the
firmware)
OR
≥ Downloaded from the Panasonic support web site
http://www.kmelink.net/ipproducts/us/download/index.html
For more detailed information about upgrading the firmware, refer to the
Operating Instructions of the Broadband Networking Gateway.
After upgrading the Broadband Networking Gateway, be sure to
follow the below notes:
≥ Restart the computer connected to the Broadband Networking
Gateway.
≥ Confirm the Broadband Networking Gateway has been
successfully upgraded referring to the Status screen of the
Broadband Networking Gateway administration web screen.