Updating the kx-hgc200 firmware – Panasonic KX-HGC200 User Manual
Page 65
65
For assistance, please call: 1-800-272-7033
Appendix
Updating the KX-HGC200 Firmware
“
The KX-HGC200 firmware written in the Flash-ROM can be updated
using the update utility software. Before update, the firmware must have
been downloaded in the computer to which the KX-HGC200 is attached.
The latest firmware can be downloaded from the Panasonic support web
site
http://www.kmelink.net/ipproducts/us/download/index.html
1
Make sure the KX-HGC200 is inserted in the PC card slot of the
computer and the READY indicator of the KX-HGC200 is lit.
2
Terminate the Network Manager software using its icon on the
taskbar, referring to p. 54 “Close Network Manager”.
≥
The Network Manager icon disappears.
≥
To show the Network Manager icon later, restart the computer.
3
From the Start menu, point to Programs, point to Panasonic
Wireless PC Card and click Firmware Update.
Note:
When the KX-HGC200 is used with the Broadband Networking
Gateway and the KX-HGC200 firmware has been updated, the
Broadband Networking Gateway firmware must be upgraded to the
latest one also.
For more details about the latest firmware, refer to the information
on the Panasonic support web site.