Panasonic KX-HGC200 - Manual (Page 34)

34
“ Installing the KX-HGC200 to a Computer
6 Click [Finish] .
7 Click [Yes] to restart the computer.
≥ If the above dialog box does not appear, restart the computer manually.
The device driver has been successfully installed to your computer. After
the computer restarts, refer to p. 38 and install the Network Manager
software.
While a computer is restarting, mind below notification.
≥ If the KX-HGC200 has been installed to a computer, restarting
may take about a few minutes.
≥ To prevent a device from being damaged or broken, never
turn off a computer while restarting.