Panasonic KX-HGC200 - Manual (Page 46)

46
“ Setting up Your Computer
Setting an IP address
To communicate on a wireless network, setup of an IP address is
necessary to each wireless computer. Actual steps for IP addressing differ
depending on if you plan to add the Broadband Networking Gateway to
your wireless network or not.
IP addressing steps for networking with the Broadband
Networking Gateway
The steps below are for connecting a wireless computer to the Broadband
Networking Gateway. As the default setting of the Broadband Networking
Gateway, it uses the DHCP (Dynamic Host Configuration Protocol) server
function to address all the nodes in the network, including wireless
computers.
If you are using the DHCP server function of the Broadband Networking
Gateway, IP addressing for each computer is automatic. However, if you
have customized and disabled the DHCP server function of the
Broadband Networking Gateway, setup of the IP address and related
parameters is necessary to the wireless computer.
1 From the Start menu on a wireless computer, point to Settings, then
click Control Panel.
2 Double-click the Network icon.
≥ If you are using Windows Me and can not find the Network icon, click
view all Control Panel options to show the Network icon.