Panasonic MC-UG787 - Manual (Page 32)

- 32 -
Changing Dust Bag
Always operate vacuum cleaner with genuine Panasonic Type U12 Electrostatic or U10 HEPA
dust bags installed. Panasonic dust bags may be purchased through any authorized
Panasonic dealer or ordered from service company.
➢ ➢ Open dust cover.
➢ ➢ Pull down and outward on bag holder
handle to remove from cavity.
➢ ➢ Pull the cardboard collar of the dust
bag sliding the dust bag out of bag
holder.
➢ ➢ Spread out new dust bag, taking care
not to tear bag.
➢ ➢ Attach new dust bag onto bag holder
by holding cardboard collar and
sliding it back into the bag holder.
➢ ➢ Reinsert tabs on the bottom of bag
holder into groove on the front of
secondary filter.
➢ ➢ Hold down the handle and push back
the bag holder, press into place
without pinching dust bag, release
the handle.