About progressive scan video, 15 03 controls and displays – Pioneer DVD-V5000 User Manual

Page 15

Advertising
background image

15

03

Controls and displays

16 PROGRAM
Lights when repeat play, program play or
command stack function is operated.

17 PLAY
Lights during playback, and flashes when
starting up.

18 POWER
Lights green when the player is on.
Lights orange when the player is in the standby
mode.

About progressive scan
video

Compared to interlace video, progressive scan
video effectively doubles the scanning rate of the
picture, resulting in a very stable, flicker-free
image.
Progressive scan video is available only from the
COMPONENT VIDEO OUT. Use the PROGRES-
SIVE
button on the front panel to switch the
COMPONENT VIDEO OUT between Interlace
and

Progressive. With a DVD-Video disc you can

do this during playback, or when the disc is
stopped. For other types of disc, the player must
be stopped.

If you connect a TV that is not compatible
with a progressive scan signal and switch
the player to

Progressive, you will not be

able to see any picture at all. In this case,
press the

PROGRESSIVE button on the front

panel to switch back to

Interlace (the

PROGRESSIVE indicator should be unlit).

• When

COMPONENT VIDEO OUT is set to

Progressive, there is no video output from
the

VIDEO OUT (composite) and S (S-video)

jacks. If you want to display video on more
than one monitor simultaneously, make
sure that it is set to

Interlace. Press

PROGRSSIVE on the front panel to switch
the player back to

Interlace.

• You can’t switch the video output when an

OSD is on-screen.

• The picture on some TVs may momentarily

break up when you switch the video output
of this player.

Compatibility of this unit with
progressive-scan TVs.

This player is compatible with progressive video
Macro Vision System Copy Guard.

CONSUMERS SHOULD NOTE THAT NOT ALL
HIGH DEFINITION TELEVISION SETS ARE
FULLY COMPATIBLE WITH THIS PRODUCT
AND MAY CAUSE ARTIFACTS TO BE DIS-
PLAYED IN THE PICTURE. IN CASE OF 525
PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS
RECOMMENDED THAT THE USER SWITCH THE
CONNECTION TO THE “STANDARD DEFINI-
TION” OUTPUT. IF THERE ARE QUESTIONS
REGARDING OUR TV SET COMPATIBILITY
WITH THIS MODEL 525p DVD PLAYER,
PLEASE CONTACT OUR CUSTOMER SERVICE
CENTER.

19

and

Press and hold for fast reverse/forward scanning.
Press to jump to the previous/next chapter or
track.

20
This mark indicates compatibility with
DVD-RW discs recorded on a DVD recorder in
Video Recording mode.

Advertising