Pioneer DVD-V5000 - Manual (Page 52)

52
10 Barcode Stack / Command Stack
Example 2: Input wait time
1 Press ENTER in the command input area.
2 Use the
/ (cursor up/down) buttons
to select “COMMAND” then press ENTER.
Group001
SEGMENT PLAY
CHAPTER PLAY
COMMAND
001
002
003
004
005
006
007
008
Command Stack
Group(1-001) Command(0-000)
Move Select ENTER RETURN Return Exit HOME MENU
3 Use the
/ / / (cursor up/down/
left/right) buttons to select “WAIT”
then use the number buttons to select
the desired time (wait for ‘x’ seconds)
and press ENTER.
Group001
PLAY PAUSE
STEP REV
WAIT
REPEAT GROUP
GO TO GROUP
DIVIDE GROUP
MERGE GROUP
STOP
STEP FWD
999 sec.
000
001
002
003
004
005
006
007
008
Command Stack
Group(1-001) Command(0-000)
Move Select ENTER RETURN Return Exit HOME MENU
The wait length can be set up to 999 seconds.
Example 3: “Play title 3, frames
123000 to 129000”
1 Press ENTER in the command input area.
2 Use the / (cursor up/down) buttons
to select “SEGMENT PLAY” then press
ENTER.
Group001
SEGMENT PLAY
CHAPTER PLAY
COMMAND
001
002
003
004
005
006
007
008
Command Stack
Group(1-001) Command(0-000)
Move Select ENTER RETURN Return Exit HOME MENU
3 Press number button 3 then press ENTER.
Title 3 is designated and frame input mode
is set.
4 Press 1 2 3 0 0 0 ENTER.
• The starting frame number is designated.
• To enter this sequence during playback, use
the search function to find the desired
starting frame.
• It does not operate the search function,
when the (cursor down) button is pressed
without pressing the ENTER.
5 Press 1 2 9 0 0 0 ENTER.
• The ending frame number is marked.
• During playback, press the
ENTER button
instead of using the number buttons from
steps 4 – 5. This action causes the currently
playing frame to be input as the ending
frame number.
6 Use the
/ / / (cursor up/down/
left/right) buttons to select “OK” then
press ENTER.
Group001
TITLE
SEARCH FRAME
MARK FRAME
OK CANCEL
03
123000
129000
001
002
003
004
005
006
007
008
Command Stack
Group(1-001) Command(0-000)
Move Select ENTER RETURN Return Exit HOME MENU
• The must be a difference of at least 25
frames the “ SEARCH FRAME” (starting
frame) and the “ MARK FRAME” (ending
frame).
This method is unavailable for fewer than 24
frames.
• Frame search and frame segment playback
cannot be used with VR formatted DVD-RW
discs.