Pioneer DVD-V5000 - Manual (Page 37)

37
07 Audio Settings menu
Chapter 7
Audio Settings menu
Audio DRC
• Default setting is Off.
When watching Dolby Digital DVDs at low
volume, it’s easy to lose the quieter sounds
completely-including some of the dialog.
Switching Audio DRC (Dynamic Range Control)
to On can help by bringing up the quieter
sounds, while controlling loud peaks.
How much of a difference you hear depends on
the material you’re listening to. If the material
doesn’t have wide variations in volume, you may
not notice much change.
1 Press HOME MENU and select “Audio
Settings” from the on-screen display.
Audio Settings
Play Mode Disc Navigator
Initial Settings
Video Adjust
2 Highlight Audio DRC, then use the /
(cursor left/right) buttons to change to
“On” or “Off,” as required.
Audio Settings
Audio DRC
Virtual Surround
Off
Off
3 Press ENTER to make the setting and exit
the Audio Settings screen.
• Audio DRC is only effective with Dolby
Digital audio sources.
• Audio DRC is only effective through the
digital output when Digital Out (see page
19) is set to On, and Dolby Digital Out (see
page 20) is set to Dolby Digital > PCM.
• The effect of Audio DRC depends on your
speakers and AV receiver settings.
Virtual Surround
• Default setting is Off.
Switch on Virtual Surround to enjoy surround
sound effects from just two speakers.
When you play a Dolby Digital soundtrack,
TruSurround technology from SRS produces a
deep, realistic 3D soundspace from a pair of
stereo speakers. SRS TruSurround is a process
approved by Dolby Laboratories for Virtual Dolby
Digital sound.
1 Press HOME MENU and select “Audio
Settings” from the on-screen display.
Audio Settings
Play Mode Disc Navigator
Initial Settings
Video Adjust