Planet Technology Network Device WAP5 - Manual (Page 16)

- 12 -
3.3.1.1 Find
This function helps you to quickly locate all compatible devices (include AP and Bridge). Open the
Start menu and select Find, or click on the icon , or press F5. Few seconds later, the MAC
addresses of all compatible devices will be listed below. If you select a specific device from the left
field, its detailed settings will be shown in the right field.
3.3.1.2 Preference
You can set the parameters for the Kick Start as desired. Open the Start menu and select
Preference, a dialog box will appear as below. After completing desired modifications, click OK to
close the dialog box and apply the changes to Kick Start.
3.3.1.3 New
If the MAC address of the device is already known, you can use this function to connect it directly.
Open the Edit menu and select New, or click on the icon , a dialog box will pop up. Enter the