Planet Technology Network Device WAP5 - Manual (Page 18)

- 14 -
3.3.1.8 Change Password
This function allows you to change the administrative password of the device. Highlight the MAC
address of a device from the list, open the Tools menu and select Change Password, or click on
the icon , a dialog box will pop up. Type the Old Password, New Password, and confirm New
Password again, then click OK button to close the box and apply the changes to the device.
3.3.1.9 Reboot
This function allows you to reboot the device without unplugging its power adapter. Highlight the
MAC address of a device from the list, open the Tools menu and select Reboot, or click on the icon
, a dialog box will pop up and ask for the administrative password. Type in the correct password,
then click OK button to close the box and reboot the device.
3.3.1.10 Restore Default
This function allows you to restore default settings of the device. Highlight the MAC address of a
device from the list, open the Tools menu and select Restore Default, or click on the icon , a
dialog box will pop up and ask for the administrative password. Type in the correct password, then
click OK button to close the box and restore default settings.
3.3.2 Hosts View
Hosts View is the major part of the WMS. It supports not only individual remote management, but also
batch mode operation, including multi-monitor, batch upgrade, batch reset, and batch load default
settings. Batch mode operation can efficiently reduce administrative efforts when deploying multiple
WAP-5000s.
Open Start menu and select Start Hosts View, or click on the icon from the main WMS window,
then the Hosts View window appears as below.