Planet Technology Network Device WAP5 - Manual (Page 29)

- 25 -
•
Supplicant Timeout – This control sets the maximum time that the AP will wait for an
authentication response from a client. Once this limit has been reached, the AP will check how many
times it has tried.
•
Fail Retries – This is the number of times the AP will restart the authentication process with the
client before returning an error.
•
Enable Reauthentication – If this control is checked, the AP will re-initiate authentication
whenever the specified amount of time has expired.
•
Enable WEP Key Delivery – If this control is checked, the AP will pass the WEP key to the client
after the authentication procedure has finished. This only applies when the AP has WEP enabled,
EAP-TLS is being used on the RADIUS server as the authentication method, and the supplicant has
been authenticated with the RADIUS server.
Accounting Options