Panasonic DMC-TZ1 - Manual (Page 39)

Advanced
39
VQT0V40
• When you take pictures with the flash
or in dark places, the histogram is
displayed in orange because the
recorded picture and the histogram do
not match each other.
• The histogram is an approximation in
recording mode.
• The histogram of a picture may not match
in recording mode and playback mode.
• The histogram displayed in this camera
does not match histograms displayed by
picture editing software used in PCs etc.
• Check for any white saturated areas with
the highlight display when the auto review
or review function is activated. (P38)
• The histogram does not appear in simple
mode [ ] or motion picture mode [ ]
and during multi playback or calendar
playback and playback zoom.
1 Press [LCD MODE] for one
second.
A LCD monitor (LCD)
2 Press 3/4 to select a mode.
3 Press [MENU/SET].
B: POWER LCD
C: HIGH ANGLE
• The [POWER LCD] or [HIGH ANGLE]
icon appears.
Brightening the LCD Monitor
(Power LCD/High angle mode)
SCN 1 SCN 2
DISPLAY/LCD MODE
LCD MODE
SET SELECT MENU
LCD
OFF
HIGH ANGLE
POWER LCD
[ ]:
POWER LCD
The LCD monitor
becomes brighter and
easier to see even when
taking pictures outdoors.
[ ]:
HIGH ANGLE
The LCD monitor is easier
to see when taking
pictures with the camera
held high above your
head. This is useful when
you cannot get close to
the subject because there
is a person in the way.
(However it becomes
more difficult to see when
looked at straight on.)
[OFF] The LCD monitor returns
to the normal brightness.
B
C
3
VQT0V40ENG.book 39 ページ ２００６年２月２７日 月曜日 午後１時１９分