Format – Panasonic DMC-TZ1 User Manual

Page 91

Advertising
background image

Menu Settings

91

VQT0V40

• If you copy picture data from the built-in

memory to a card, we recommend using a
card which has more free space than the
built-in memory (about 13.4 MB).

• It may take time to copy the picture data.
• Only pictures recorded with a Panasonic

digital camera (LUMIX) will be copied.
(Even if the pictures were recorded with a
Panasonic digital camera, you may not be
able to copy them if they were edited with
a PC.)

• DPOF settings on the original picture data

will not be copied. Set the DPOF settings
again after copying is finished. (P84)

• If a picture with the same name as the

picture to be copied exists in the copy
destination, the picture will not be copied.

• If you copy picture data from the built-in

memory to a card which does not have
sufficient free space, the picture data will
only be copied halfway.

Press [

] to display the [PLAY] mode

menu and select the item to set. (P80)
Usually, it is not necessary to format the
built-in memory and the card. Format them
when the message [BUILT-IN MEMORY
ERROR] or [MEMORY CARD ERROR]
appears.

Press

3 to select [YES] and then

press [MENU/SET].

(The illustration shows the screen when
the built-in memory is formatted.)

• When a card is not inserted, you can

format the built-in memory. When a
card is inserted, you can format the
card.

• If you press [MENU/SET] while

formatting the built-in memory, the
formatting will stop halfway. (However,
all the pictures will be deleted.)

• Formatting irretrievably deletes all the

data including any protected pictures.
Check the data carefully before
formatting.

• If the card has been formatted on a PC or

other equipment, format it on the camera
again.

• Use a battery with sufficient battery power

(P13) or the AC adaptor (DMW-AC5;
optional) when formatting.

• Do not turn the camera off during

formatting.

• It may take longer to format the built-in

memory than the card. (Max. about
15 sec.)

• You cannot format an SD Memory Card

when the card’s write protect switch is set
to [LOCK].

• If the built-in memory or the card cannot

be formatted, consult your nearest
servicenter.

[FORMAT]

Initializing the card

MENU

SET

MENU

SET

FORMAT

DELETE ALL DATA
ON THE BUILT-IN MEMORY?

NO

SELECT

SET

MENU

YES

For USA assistance, please call: 1-800-272-7033
or send e-mail to : [email protected]

For Canadian assistance, please call:
1-800-561-5505 or visit us at www.panasonic.ca

VQT0V40ENG.book 91 ページ 2006年2月27日 月曜日 午後1時19分

Advertising