Panasonic DMC-TZ1 - Manual (Page 57)

Advanced
57
VQT0V40
Press [ ] to display the [SCENE MODE]
menu and select this mode. (P50)
The sensitivity is set higher than usual
allowing for pictures to be taken with faster
shutter speeds. This mode helps minimize
the blur of moving subjects in situations
with inadequate lighting such as a baby in a
dimly lit room.
• ISO sensitivity is automatically set to the
optimal value between [ISO800] and
[ISO1600].
• The focus range becomes the same as
macro mode. [5 cm (0.16 feet) (Wide)/1 m
(3.28 feet) (Tele) to
¶]
• The resolution of the recorded picture
decreases slightly because of high
sensitivity processing. This is not a
malfunction.
• You can take pictures suitable for 4 qk6q/
10 k15cm printing.
• The extended optical zoom and digital
zoom cannot be used.
Press [ ] to display the [SCENE MODE]
menu and select this mode. (P50)
This mode takes pictures of a baby with a
healthy complexion. When the flash is
used, the light from it is weaker than usual.
You can set the birthdays of two babies by
using [BABY1] and [BABY2].
• The baby’s age can be displayed when
playing back pictures.
• The age can also be printed on each
picture by using the software [LUMIX
Simple Viewer] or
[PHOTOfunSTUDIO-viewer-] in the
CD-ROM (supplied). (For information
about printing, refer to the separate
operating instructions for PC connection.)
∫ Age display setting
• If you want the age to be displayed, set
the birthday in advance, select
[WITH AGE] and press [MENU/SET].
• If you do not want the age to be displayed,
select [WITHOUT AGE] and press
[MENU/SET].
∫ Birthday setting
1 Press
3/4 to select [BIRTHDAY SET.]
and then press [MENU/SET].
2 When the message [PLEASE SET THE
BIRTHDAY OF THE BABY] appears,
select items (Year/Month/Day) using
2/
1 and set them using 3/4.
3 Press [MENU/SET] to finish the setting.
• If you select [WITH AGE] without setting
the birthday in advance, a message is
displayed. Press [MENU/SET] and set the
birthday in steps 2 and 3.
• The focus range becomes the same as
macro mode. [5 cm (0.16 feet) (Wide)/1 m
(3.28 feet) (Tele) to
¶]
• After turning on the camera in [BABY1]/
[BABY2] in scene mode or switching to
[BABY1]/[BABY2] from other scene
modes, the age and current date and time
are displayed for about 5 seconds at the
bottom of the screen.
• The age display style differs depending on
the language setting in the recording
mode.
High Sensitivity mode
Baby mode 1/
Baby mode 2
MENU
SET
3
1
2
MENU
SET
10:00 DEC. 1.2006
9 months 10 days
BABY1
WITHOUT AGE
BIRTHDAY SET.
WITH AGE
SELECT SET MENU CANCEL
1 1
3
VQT0V40ENG.book 57 ページ ２００６年２月２７日 月曜日 午後１時１９分