Panasonic DMC-TZ1 - Manual (Page 64)

Advanced
64
VQT0V40
Motion Picture Mode
1 Press the shutter button halfway
to focus and then press it fully to
start recording.
• When the subject is focused, the focus
indication lights.
• The available recording time A is
displayed on the top right and the
elapsed recording time
B is displayed
on the bottom right of the screen.
For example, 1 hour 20 minutes and
30 seconds is displayed as
[1h20m30s].
• The available recording time and the
elapsed recording time are
approximations.
• Audio recording starts simultaneously
from the camera’s built-in microphone.
• You can use the zoom while recording.
However, the zoom movement
becomes slower than usual.
• Zoom or operation sounds may be
recorded.
• We recommend setting [CONT.AF]
(P76) to [ON]. It can also be set to
[OFF], however if you rotate the zoom
lever it will become difficult to focus.
2 Press the shutter button fully to
stop recording.
• If the built-in memory or the card
becomes full in the middle of recording,
the camera stops recording
automatically.
∫ Changing the settings for the aspect
ratio and the picture quality
1 Press [MENU/SET].
2 Press 3 4 to select
[ASPECT RATIO] and then press
1.
3 Press 3 4 to select the item and
then press [MENU/SET].
4 Press 3 4 to select
[PICT.MODE] and then press 1.
5 Press 3 4 to select the item and
then press [MENU/SET].
If you selected [ ] on the screen
shown in step 2
R 20
5
Item Picture size fps
30fpsVGA
640 k480 pixels
30
10fpsVGA 10
30fpsQVGA
320 k240 pixels
30
10fpsQVGA 10
AF MODE
REC 1 / 2
AUTO
AUTO
METERING MODE
PICT.MODE
W.BALANCE
ASPECT RATIO
SELECT SET MENU
AF MODE
OFF
REC 1 / 2
AUTO
METERING MODE
W.BALANCE
ASPECT RATIO
PICT.MODE
SELECT SET MENU
VQT0V40ENG.book 64 ページ ２００６年２月２７日 月曜日 午後１時１９分