Patton electronic 12168 - Manual (Page 19)

19
5.0 OPERATION
Once the Model 1068s are properly installed, they should operate trans-
parently. No user settings required. This section describes reading the
LED status monitors.
5.1 POWER UP
Before applying power to the Model 1068, please review section 3.6,
“Connecting Power” on page 14 to verify that the unit is connected to the
appropriate power source.
5.2 FRONT PANEL LED STATUS MONITORS
The Model 1068 features five front panel LEDs that monitor power, the
Ethernet signals, and the VDSL connection. Figure 13 (standalone ver-
sion) and Figure 14 on page 20 (rack card version) show the front panel
location of each LED. Table 5 on page 20 describes the LED functions.
Figure 13. Model 1068 standalone unit front panel
Power
LED
VLINK Modem
Po we
r
Link
QOL
Link
Activity
VLINK
Ether
net
VLINK LED
VDSL
QOL LED
Ethernet
Link LED
Ethernet
Activity LED