Patton electronic 12168 - Manual (Page 5)

5
1.3 FCC PART 68 (1068DV ONLY)
This equipment complies with Part 68 of the FCC Rules. Please note the
following:
1. You are required to request service from the telephone company
before you connect the Model 1068DV to a network. When you
request service, you must provide the telephone company with the
following data.
— The required Universal Service Order code (USOC)
jack: RJ-11C
— The make, model number, Ringer Equivalence Number (REN),
and FCC Registration number of the Model 1068DV.
The REN helps you determine the number of devices you can con-
nect to your telephone line and still have all of those devices ring
when your number is called. In most, but not all, areas, the sum of
the RENs of all devices should not exceed five (5.0). To be certain of
the number of devices you can connect to your line, you should call
your local telephone company to determine the maximum REN.
— The Facility Interface Code: 02LS2
— The Service Order Code(s) (SOC): 9.0F
— REN No.: 0.2
2. Your telephone company may make changes to its facilities, equip-
ment, operations, or procedures that could affect the proper func-
tioning of your equipment. The telephone company will notify in
advance of such changes to give you an opportunity to maintain
uninterrupted telephone service.
Caution
The Model 1068D is not intended to be connected to the
public telephone network.
Caution
The VLINK port is not intended to be connected to the
public telephone network. The 1068DV contains a
POTS/ISDN connection that can be connected to the
public telephone network.