Panasonic DPMC210 - Manual (Page 43)

5. Copier
43
L You can press {Black}/{Color} anytime to
start copying.
Easy repeat feature:
{ Black}/{Color}
8 After you finish copying, press {Stop} to reset this
feature.
Note:
L You can save the previous page layout setting
(feature #467 on page 67).
5.2.3 Poster feature (Scanner glass only)
You can make copies divided into 4 (“ 2 ×2”) or 9 (“3×3”)
sections to make enlarged copies of the individual
sections. You can then glue them together to make a
poster.
1 Set the original (page 20).
2 Press {V} or {^} repeatedly to select “ Page
Layout”. i {<}/{>}
3 Press {V} or {^} repeatedly to select “ Poster”. i
{ Set}
4 Press {V} or {^} repeatedly to select “ 2 ×2” or
“ 3 ×3”. i {Set}
5 If necessary, enter the number of copies (page 40).
L Other copy settings are also available. See page
40 for details.
6
{ Black}/{Color}
7 After you finish copying, press {Stop} to reset this
feature.
Note:
L You can save the previous page layout setting
(feature #467 on page 67).
5.2.4 N in 1 feature
You can save paper by copying 2, 4 or 8 pages onto 1
page. The documents will be reduced to fit the recording
paper.
1 Set the original (page 20).
L To make a portrait copy, set the original in portrait
direction. To make a landscape copy, set the
original in landscape direction.
2 Press {V} or {^} repeatedly to select “ Page
Layout”. i {<}/{>}
3 Press {V} or {^} repeatedly to select “ N in 1”. i
{ Set}
4 Press {V} or {^} repeatedly to select the desired
page layout.
–
“ 2 in 1 (Portrait)”
– “ 2 in 1 (Landscape)”
– “ 4 in 1 (Portrait)”
– “ 4 in 1 (Landscape)”
– “ 8 in 1 (Portrait)”
– “ 8 in 1 (Landscape)”
5
{ Set}
6 If necessary, enter the number of copies (page 40).
L Other copy settings are also available. See page
40 for details.
7 When using the scanner glass:
1. {Black}/{Color}
L The unit will scan 1 page.
2. Place the next document on the scanner glass
and press {Set}. Repeat this until all the
documents are scanned.
L The unit will start copying.
L You can press {Black}/{Color} anytime to
start copying.
When using the automatic document feeder:
{ Black}/{Color}
8 After you finish copying, press {Stop} to reset this
feature.
Note:
L You can save the previous page layout setting
(feature #467 on page 67).
Separate N in 1 feature (Scanner glass only)
You can separate an N in 1 copied document back into
its original, separate pages. This feature is available for
documents created using the “
2 in 1” and “4 in 1”
settings.
1. Set the original (page 20).
2. Press {V} or {^} repeatedly to select “ Page
Layout”. i {<}/{>}
3. Press {V} or {^} repeatedly to select “ Separate N
in 1”. i {Set}
4. Press {V} or {^} repeatedly to select the desired
page layout.
–
“ 2 in 1 (Portrait)”
– “ 2 in 1 (Landscape)”
– “ 4 in 1 (Portrait)”
– “ 4 in 1 (Landscape)”
5. {Set}
6. If necessary, enter the number of copies (page 40).
L Other copy settings are also available. See page
40 for details.
7. {Black}/{Color}
8. After you finish copying, press {Stop} to reset this
feature.
5.2.5 Copy reservation
You can make a copy reservation under the following
conditions:
–
while the unit is printing documents from your
computer.
– while the unit is printing received fax documents.
– while the unit is performing direct printing.
1 Set the original (page 20).