Panasonic DPMC210 - Manual (Page 44)

5. Copier
44
2 While “ PC Printing”, “Printing” or
“ Loading” is displayed, press {Copy}.
3 Make necessary settings such as number of copies,
resolution, zoom features and page layout features
(page 40). i {Black}/{Color}
L “ Copy Reserved” will be displayed. The unit
will start copying after the current printing job.
5.2.6 Duplex copy (optional)
You can make a duplex copy if the optional automatic
duplex unit is connected (page 84). This allows you to
make 2-sided copies of 1-sided documents.
1 Set the original (page 20).
2 { Advance}
3 Press {V} or {^} repeatedly to select “ Duplex”.
4 Press {<} or {>} repeatedly to select the desired
binding.
–
“ Long Edge”
– “ Short Edge”
L Select “ Off” to deactivate this feature.
5
{ Set} i {Advance}
6 If necessary, enter the number of copies (page 40).
L Other copy settings are also available. See page
40 for details.
7 When using the scanner glass:
1. {Black}/{Color}
L The unit will scan 1 page.
2. Place the next document on the scanner glass
and press {Set}.
L The unit will start copying.
When using the automatic document feeder:
{ Black}/{Color}
8 After you finish copying, press {Stop} to reset this
feature.
Note:
L Duplex copy is not available for the quick ID copy
feature (page 42), easy repeat feature (page 42) or
poster feature (page 43).
L You can save the previous duplex setting (feature
#470 on page 67).
Booklet feature
You can make copies, and then fold them in half to create
booklets. The documents will be reduced to fit the
recording paper.
1. Set the original (page 20).
2. Press {V} or {^} repeatedly to select “ Page
Layout”. i {<}/{>}
3. Press {V} or {^} repeatedly to select “ Booklet”.
i {Set}
4. Press {V} or {^} repeatedly to select the desired
binding direction and pages.
– “ Left Binding(1)”
– “ Left Binding(All)”
– “ Right Binding(1)”
– “ Right Binding(All)”
L “ (1)”: To print 4 documents as separate blocks.
L “ (All)”: To print all documents as 1 block
(monochrome printing only).
5. {Set}
6. If necessary, enter the number of copies (page 40).
L Other copy settings are also available. See page
40 for details.
L Multiple copies will be collated automatically.
7. When using the scanner glass:
1. {Black}/{Color}
L The unit will scan 1 page.
2. Place the next page on the scanner glass and
press {Set}. Repeat this until you have scanned
all pages.
3. If “ Left Binding(1)” or “Right
Binding(1)” is selected in step 4, the unit will
start copying.
L You can press {Black}/{Color} anytime to
start copying.
L For multiple copies, press {Black}/{Color} to
start copying.
If “ Left Binding(All)” or “Right
Binding(All)” is selected in step 4, press
{
Black} to start copying.
When using the automatic document feeder:
{ Black}/{Color}
8. After you finish copying, press {Stop} to reset this
feature.
Note:
L If “ Left Binding(All)” or “Right
Binding(All)” is selected in step 4, only
monochrome copy is available, so press {Black} in
step 7. If you press {Color}, steps 2 to 6 will be reset.
L You can save the previous page layout setting
(feature #467 on page 67).