Panasonic DPMC210 - Manual (Page 89)

11. Help
89 For assistance, please contact an authorized Panasonic dealer.
“ Memory Full” L When performing memory transmission, the document being stored
exceeded the memory capacity of the unit. Send the entire document
manually.
L When making a copy, the document being stored exceeded the memory
capacity of the unit. Press {Stop} to clear the message. Divide the
document into sections.
“ Memory Overflow”
L When printing a file, the document being stored exceeded the memory
capacity of the unit. Press {Stop} to clear the message. Change the printer
settings (page 29).
“ Modem Error” L There is something wrong with the unit’s modem. Contact our service
personnel.
“ No Fax Reply” L The other party’s fax machine is busy or has run out of recording paper. Try
again.
“ No Printable Data” L There is no printable data on the SD card or FTP server. Store the data in
a supported format.
“ Not Supported Format” L The files on the SD card are in an unsupported format. Use one of the
supported formats (page 31).
L The SD card is not formatted correctly. After backing up your data, use your
computer to format the SD card, selecting FAT for the file system.
Formatting the card will erase all data stored on the SD card.
“ Not Supported Media” L The inserted SD card could not be read. Use a supported SD card (page
80).
“ Out of Paper Input Tray
#1”
L Recording paper is not installed or the paper input tray has run out of paper.
Install paper (page 15, 30).
L Recording paper was not fed into the unit properly. Reinstall the paper
(page 15, 30).
Note:
L “ #1”: Standard input tray
L “ #2”: Optional input tray
L “ #1+#2”: Standard input tray and optional input tray
“ Paper Jammed” L A recording paper jam occurred. See the other displayed message
instructions to remove the jammed paper (page 101).
“ PC Fail or Busy.” L The cable or the computer power cord is not connected correctly. Check the
connections (page 18, 26).
L The software is not running on the computer. Restart the software and try
again.
“ Please Wait” L The unit is warming up. Wait for a while.
“ Redial Time Out” L The other party’s fax machine is busy or has run out of recording paper. Try
again.
“ Remove Document” L The document is jammed. Remove the jammed document (page 106).
L Attempted to send or copy a document longer than 600 mm (23
5
/
8
") using
the automatic document feeder. Press {Stop} to remove the document.
Divide the document into two or more sheets and try again.
Display Cause & Solution