Pioneer PDV-LC20 - Manual (Page 13)

13
En
02 Getting Started
English
1 Connect the power cord to the
AC adapter.
2 Plug the power connector into
the DC IN jack on the rear of
the player.
3 Plug the other end of the power
cord into a wall power outlet.
• The supplied AC adapter is compatible
with 100~240V AC power so that it can
be used almost anywhere in the world
(although you may need a plug
adapter).
4 Open the LCD screen in the
direction of the arrow (PDV-
LC20 only).
5 Press and hold the
3 (ON)
button until the player switches
on.
• With the power on the power indicator
lights green.
• You can use the button on the
remote control to switch the player into
standby. When in standby, the power
indicator lights red.
Plugging in and switching on
Power-cord caution
Handle the power cord by the plug. Do not pull out the plug
by tugging the cord and never touch the power cord when
your hands are wet as this could cause a short circuit or
electric shock. Do not place the unit, a piece of furniture, etc.,
on the power cord, or pinch the cord. Never make a knot in the
cord or tie it with other cords. The power cords should be
routed such that they are not likely to be stepped on. A
damaged power cord can cause a fire or give you an electrical
shock. Check the power cord once in a while. When you find it
damaged, ask your nearest Pioneer authorized service center
or your dealer for a replacement.
1
2
3
OFF
¡ ¢ 4 1
8 7
3
∞
ON
5