Pioneer PDV-LC20 - Manual (Page 43)

43
En
04 The Setup Menu
English
Dolby Digital Out
• Set in Setup Navigator (Default: Dolby
Digital)
Move Exit SETUP
DTS Out –
96kHz PCM Out –
MPEG Out –
i
Audio1 General Language Other Video 2
Dolby Digital Out Dolby Digital
Dolby Digital
3 PCM
96kHz 3 48kHz
MPEG 3 PCM
Change Dolby Digital output mode
You only need to make this setting if you
connected this system to another
component (AV amplifier, etc.) using the
optical digital out.
If your AV amplifier (or other connected
component) is Dolby Digital compatible,
set to
Dolby Digital, otherwise set to
Dolby Digital
3 PCM.
DTS Out
• Set in Setup Navigator (Default: Off)
Move Exit SETUP
DTS Out
96kHz PCM Out –
MPEG Out –
i
Audio1 General Language Other Video 2
Dolby Digital Out – Dolby Digital
Off
DTS
MPEG
3 PCM
Changes DTS output mode
You only need to make this setting if you
connected this system to another
component (AV amplifier, etc.) using the
digital out.
If your AV amplifier (or other connected
component) is DTS compatible, set to
DTS, otherwise set to Off.
96kHz PCM Out
• Set in Setup Navigator (Default:
96kHz)
Move Exit SETUP
DTS Out –
96kHz PCM Out
MPEG Out –
i
Audio1 General Language Other Video 2
Dolby Digital Out – Dolby Digital
Off
96kHz
3 48kHz
96kHz
Changes 96kHz output mode
You only need to make this setting if you
connected this system to another
component (MD recorder, etc.) using the
digital out.
If your AV amplifier (or other connected
component) is 96kHz audio compatible, set
to
96kHz, otherwise set to 96kHz
3
48kHz.
Audio settings