Pioneer PDV-LC20 - Manual (Page 68)

07 Additional Information
68
En
Troubleshooting
If there is a problem that persists after
checking the points below, contact the store
where you bought the player.
Power does not turn on
\AC adapter not connected properly
(page 13)
\Battery is not charged (page 71).
Disc will not play
\Disc is damaged or dirty (page 65).
\Disc is not properly loaded (page 14).
\Incompatible region number (page
67).
\Condensation inside the player (page
63).
\Incompatible disc format (page 9).
\Disc is loaded upside-down (page 14).
\PDV-LC20 only: the player is set to AV
input (page 55).
mark appears on screen
\The operation is prohibited by the disc.
mark appears on screen
\The operation is prohibited by the
player.
mark appears on screen
\This setting will take effect when you
next load a DVD disc.
Settings made when a disc was
playing do not take effect
\Some settings do not take effect until
the disc is stopped then started again
(note that the resume feature may not
work, depending on the setting(s)
changed.)
Settings have been erased
\If power is cut or the player is
unplugged while a disc is playing, any
settings made while the current disc
was playing will be lost. Always switch
off the player using the
OFF (
7)
button, or button on the remote.
Noisy picture when a DVD is
recorded on a VCR or played via
a VCR
\Some discs are copy-protected. Such
discs will not play properly when played
via a VCR or when recorded on a VCR.
Player cannot be operated with
the remote control unit
\Remote control is outside its operating
range (page 11).
\Battery in the remote control battery is
exhausted (page 62).
TV or other device operates
erroneously
\This player’s remote may interfere with
other remote controlled devices.