Pioneer DVR-650H-K - Manual (Page 104)

The Initial Setup menu 14
104
En
Chapter 14
The Initial Setup menu
Using the Initial Setup menu
The Initial Setup menu is where you can set various recorder options for sound, picture,
language and so on.
Some settings can only be changed when the recorder is stopped. During playback and
recording these settings are grayed out in the Initial Setup menu.
Except for the Setup Navigator, menu screens are exited automatically after 20 minutes of
inactivity.
• Press HOME MENU and select ‘Initial Setup’.
In the table below, the default option is marked with a •.
Setting Options Explanation
Basic
Clock Setting Auto Set the channel that broadcasts a clock signal and
the clock will be set automatically.
Manual • If there is no channel that broadcasts a clock signal
in your area, you can set the time and date manually.
The clock must be set in order to use timer recording.
HELP Setting On • Switches on the automatic Help screens for GUI
displays.
Off Switches off the automatic Help screens for GUI
displays. (Press
HELP on the remote to manually
display the Help screen.)
Setup Navigator Start Select to start the Setup Navigator. See also
Switching on and setting up on page 30 .
Tuner
Auto Channel
Setting Antenna • Select if you receive channels from an antenna. It
takes a few moments for the auto tuning to complete.
Cable Select if you receive channels via cable. It takes a few
moments for the auto tuning to complete.
Manual CH Setting Next Screen Proceed to the next screen if you need to adjust any
of the settings made by auto tuning.
• Change channels using the
PREV / NEXT
buttons.
• To skip the displayed channel (because there is no
station assigned to that channel), change the
Skip
setting to On .
• To manually fine tune the channel, change the AFT
setting to Off then adjust the Level setting.
DVR650HK_KC_EN.book 104 ページ ２００７年２月２１日 水曜日 午後４時３１分