Pioneer DVR-650H-K - Manual (Page 105)

The Initial Setup menu
105
En
14
VCR Plus+ CH
Setting Next Screen Guide channels are used by the VCR Plus+ system
so that the channel number specified in the VCR
Plus+ programming numbers can be guaranteed to
correspond to the correct station. Look in your TV
guide to see which channel numbers should be
assigned to which guide channels.
• Use the
/ buttons to change the guide channel
for setting.
• Use the
/ buttons to change the channel
number.
• Use the
PREV / NEXT button to display
the previous/next 10 guide channels.
• To return to the Initial Setup menu, press
ENTER .
Video Out
Component Video
Out Interlace • Select if your monitor/TV is not compatible with
progressive-scan video.
Progressive Select if your monitor/TV is progressive-scan
compatible. Check the operating instructions that
came with your monitor/TV if you’re not sure.
• If your TV is incompatible with progressive scan video and you select Progressive , you will not be able to see any
picture at all . In this case, press OPEN/CLOSE while holding down the (Stop) button on the front panel
to switch to Interlace (this also switches Screen Resolution on page 110 to the default setting).
• When the HDMI signal is output, no video is output from the COMPONENT VIDEO OUT .
Audio In
External Audio Stereo • Select if the audio from the currently selected
external input is standard stereo.
Dual Mono Select if each channel carries a separate soundtrack.
When the external audio is from the DV input, an audio subcode channel within the DV audio tells the recorder
whether the audio is stereo or dual mono. This has priority over the setting you make here.
Dual Mono
Recording L • Select to record the left channel of an external dual
mono source when recording to DVD in Video mode,
to HDD with HDD Recording Format set to Video
Mode On, or in
LPCM mode.
R As above, but for right channel recording.
When recording dual mono audio to DVD in VR mode (except in LPCM mode), or to HDD with HDD Recording
Format set to Video Mode Off (except in LPCM mode), both audio channels are recorded and you can switch to the
one you want on playback.
Setting Options Explanation
DVR650HK_KC_EN.book 105 ページ ２００７年２月２１日 水曜日 午後４時３１分