Pioneer DVR-650H-K - Manual (Page 18)

Connections 02
18
En
Using other types of video
output
This recorder has standard (composite), S-
video and component video outputs. The
main difference between them is the quality
of the picture. S-video delivers a better
picture than composite video, while
component video gives better picture quality
still. The variety of outputs also gives you the
flexibility of connecting your particular
equipment using the best connection type
available.
1 Connecting using an S-video output
S-video carries the picture as separate
colour and luminance (brightness) signals.
There are two S-video outputs for connection
to TVs, monitors, VCRs or other equipment.
• Use an S-video cable (not supplied) to
connect an S-VIDEO OUTPUT (1 or 2) to
an S-video input on your TV, monitor (or
other equipment).
2 Connecting using the component video
output
Component video carries the picture as two
separate colour signals, plus a luminance
(brightness) signal.
See also Component Video Out on page 105
for how to set up the component video
output for use with a progressive scan-
compatible TV.
• Use a component video cable (not
supplied) to connect the COMPONENT
VIDEO OUT jacks to a component video
input on your TV, monitor (or other
equipment).
TV
AC IN
DIGITAL AUDIO OUT
COAXIAL HDMI OUT CONTROL
IN
S-VIDEO VIDEO AUDIO L R
ANTENNA IN
OUT
S-VIDEO
VIDEO AUDIO L R
Y P B P R OUTPUT 1
OUTPUT 2
COMPONENT VIDEO OUT INPUT 1 /AUTO START REC
INPUT 3
COMPONENT
VIDEO OUT
1
2
S-VIDEO
OUTPUT
To component video input
To S-video input
DVR650HK_KC_EN.book 18 ページ ２００７年２月２１日 水曜日 午後４時３１分