Pioneer DVR-650H-K - Manual (Page 40)

Recording 05
40
En
The darker area represents time that has
already passed and can’t therefore be
selected. The lighter area is time that’s
available.
6 Set the start time.
The start date and time is displayed in the
middle of the screen.
• You can go back and reset the start time
if you need to by pressing RETURN .
7 Move the cursor to the
recording end time on the grid.
As you move the cursor around the grid, an
arrow stretches from the start time to the
current cursor position, representing the
length of the recording. A recording of up to
six hours can be set.
8 Set the end time.
9 Select ‘Yes’ to set the timer
recording and exit, or ‘No’ to go back to
the Easy Timer Recording screen.
• You can check the timer recording
details you just set from the main timer
recording screen (see
Setting a manual
timer recording on page 42).
Timer recording using the VCR
Plus+
®
* programming system
This system makes programming timer
recordings very simple. Most TV guides
publish PlusCode programming numbers
with their programme details. If you want to
make a timer recording of a programme, you
just input the corresponding code. The date,
start, stop and channel settings are made
automatically. All you have to do is tell the
recorder the recording mode, and whether
it’s a once-only recording or a regular
recording.
* VCR Plus+ and PlusCode are registered
trademarks of Gemstar Development
Corporation.
The VCR Plus+ system is manufactured
under license from Gemstar Development
Corporation.
1 Press ‘VCR Plus+’ to display the VCR
Plus+ programme screen.
You can also access this screen from the
Home Menu (press
HOME MENU , select
Timer Recording , then VCR Plus+ ).
• Use the number buttons to enter the
PlusCode number. (To clear the last digit
entered, press
CLEAR .)
• You can also use the / / /
buttons to select digits from the on-
screen display.
2 After making the settings, select
‘Enter’ and press ENTER.
The timer recording screen appears with the
timer programme you just set.
3 Confirm that the settings are correct.
If the channel number isn’t displayed, use
the
/ buttons to highlight CH , then use
the / buttons to set the correct channel
number.
• If the channel number is set, but
incorrectly, set up the guide channel
(see
VCR Plus+ CH Setting on page 105).
ENTER
AM PM
Easy Timer Recording
7ch
1/01
SUN
11:45
SP REC MODE
11:00 12:00 1:00 2:00 3:00 4:00 5:00
AM
– 1:45
PM
1/01
1/02
1/03
Recording start time
Recording end time
HDD HDD/DVD
ENTER
PlusCode#
1 3
4 5 6
7 8 9
0 Clear Enter
Details
Cancel
2
DVR650HK_KC_EN.book 40 ページ ２００７年２月２１日 水曜日 午後４時３１分