Planet Technology MH-2001 - Manual (Page 245)

MH-2001 Multi-Homing Security Gateway User’s Manual
Step 2: Configure all the parameters.
Source Address: Select the name of the LAN network from the drop down list. The drop down list
contains the names of all LAN networks defined in the LAN section of the Address menu. To create a
new source address, please go to the LAN section under the Address menu.
Destination Address: Select the name of the WAN 1/2 network from the drop down list. The drop
down list contains the names of all WAN 1/2 networks defined in the WAN 1/2 section of the Address
window. To create a new destination address, please go to the WAN 1/2 section under the Address
menu.
Service: Specified services provided by WAN 1/2 net work servers. These are services/application
that are allowed to pass from the LAN network to the WAN 1/2 network. Choose ANY for all services.
Schedule: Select the item listed in the schedule to enable the policy to automatically execute the
function in a certain time and range.
Authentication User: Select the item listed in the Authentication User to enable the policy to
automatically execute the function in a certain time and range.
Tunnel: Select the VPN Tunnel which you want to establish a connection.
Action: Select Permit ALL, Permit WAN 1, Permit WAN 2 or Deny ALL to allow or reject the packets
travelling between the source network and the destination network.
Traffic Log: Select Enable to enable flow monitoring.
Statistics: Select Enable to enable flow statistics.
Content Blocking: Select Enable to enable Content Filtering.
IM/P2P Blocking: Select the listed item to enable the IM/P2P Blocking.
QoS: Select the item listed in the QoS to enable the policy to automatically execute the function in a
certain time and range.
MAX. Bandwidth Per Source IP: The maximum Bandwidth that allows passing through MH-2001
which by source IP. 0 means it is unlimited.
MAX. Concurrent Sessions Per IP: The maximum concurrent sessions that allows passing through
MH-2001 which by source IP. 0 means it is unlimited.
MAX. Concurrent Sessions: The maximum concurrent sessions that allows passing through
MH-2001. 0 means it is unlimited.
Step 3: Click OK to add a new outgoing policy; or click Cancel to cancel adding a new outgoing policy.
Enabled Monitoring function:
Set up the policy that can monitor the internal users. (Take Logging, Statistics, and Alarm
Threshold for example)
STEP 1﹒Enter the following setting in Outgoing Policy:
„ Click New Entry
„ Select Logging
- 239 -