Planet Technology MH-2001 - Manual (Page 70)

MH-2001 Multi-Homing Security Gateway User’s Manual
Definitions:
„ Authentication Port: The internal users have to pass the authentication to access to the Internet
when enable MH-2001.
„ Re-Login if Idle: When the internal user access to Internet, can setup the idle time after passing
authentication. If idle time exceeds the time you setup, the authentication will be invalid. The default
value is 30 minutes.
„ Re-Login after user login successfully：When the LAN user connect to the WAN through the
authentication. The available authentication time depends on the time limit, if over the default time
setting, the authentication will be invalid.
„ Disallow Re-Login if the auth user has login：When enable this function through User, User
Group, RADIUS or POP3 to access the authentication, the authorized account can not be used by
other people.
„ URL to redirect when authentication succeed: The user who had passes Authentication have to
connect to the specific website. (It will connect to the website directly which the user want to login)
The default value is blank.
„ Messages to display when user login: It will display the login message in the authentication
WebUI. (Support HTML) The default value is blank (display no message in authentication WebUI).
6.5.2 Auth User
Click Authentication in the menu bar on the left hand side and click Auth User.
Definitions:
Name：The name of the Authentication you want to configure.
Configure: modify settings or remove users.
Adding a new Auth User
Step 1. In the Authentication window, click the New User button to create a new Auth User.
Step 2. In the Auth-User window:
- 64 -