Planet Technology MH-2001 - Manual (Page 51)

MH-2001 Multi-Homing Security Gateway User’s Manual
6.1.3 WAN
Entering the WAN window
Step 1. Click
WAN under the Address menu to enter the WAN window. The current setting information,
such as the name of the WAN network, IP and Netmask addresses will show on the screen.
Definitions
Name: Name of WAN network address.
IP/Netmask: IP address/Netmask of WAN network.
Configure: Configure the settings of WAN network. Click Modify to change the settings of WAN network.
Click Remove to delete the setting of WAN network.
NOTE: In the WAN Network window, if one of the members has been added to Policy or LAN Group, the
Configure column will show the message – In Use. In this case you are not allowed to modify or remove the
settings.
If one of the members has been added to Policy or WAN Group, the Configure column will show the
- 45 -