Planet Technology MH-2001 - Manual (Page 30)

MH-2001 Multi-Homing Security Gateway User’s Manual
System Reboot
Once this function is enabled, MH-2001 will be rebooted.
Click Reboot. The confirmation pop-up box will appear. Click OK to restart MH-2001 or click Cancel to
discard changes
4.2.2 Date/Time
Synchronizing the MH-2001 with the System Clock
Administrator can configure MH-2001’s date and time by either syncing to an Internet Network Time Server
(NTP) or by syncing to your computer’s clock.
Follow these steps to sync to an Internet Time Server
Step 1. Enable synchronization by checking the box .
Step 2. Click the down arrow to select the offset time from GMT.
Step 3. Enter the Server IP Address or Server name with which you want to synchronize.
Step 4. Update system clock every 120 minutes You can set the interval time to synchronize with
outside servers. If you set it to 0, it means the device will not synchronize automatically.
Follow this step to sync to your computer’s clock.
Step 1. Click on the Sync button. Click OK to apply the setting or click Cancel to discard changes.
- 24 -