Pioneer DV-667A-S - Manual (Page 17)

Connecting up 02
17
En
Connecting for multichannel
surround sound
You can connect this player to your AV
receiver using the multichannel analog
outputs or one of the digital outputs.
In addition to these connections, you should
also connect the 2 channel analog outputs for
compatibility with all discs.
You’ll probably also want to connect a video
output to your AV receiver. You can use any of
the video outputs available on this player (the
illustration shows a standard (composite)
connection).
Connecting using the
multichannel analog outputs
If your AV receiver has 5.1 channel analog
inputs, we recommend connecting this player
to it using the multichannel analog outputs.
Doing this will ensure that you can enjoy all
kinds of disc, including Dolby Digital and DTS
DVD-Video discs, as well as high sampling
rate and multichannel DVD-Audio and SACD
discs.
1 Connect the MULTICHANNEL AUDIO
outputs on this player to the multi-
channel audio inputs on your AV receiver.
It’s convenient to use three stereo audio
cables; one for the
FRONT , one for the
SURROUND and one for the CENTER and
SUBWOOFER channels.
2 Connect the analog AUDIO OUT L/R
and VIDEO OUTPUT jacks on this player to
a set of analog audio and video inputs on
your AV receiver.
The diagram shows standard video connec-
tions, but you can alternatively use the S-Video
or component video connections if they’re
available.
3 Connect the AV receiver’s video
output to a video input on your TV.
• You usually have to connect the same
kind of video cable between your DVD
player and AV receiver, and between your
AV receiver and TV.
L
R
L
R
P R
P B Y
FRONT SURROND
SUB
WOOFER
CENTER
COMPONENT VIDEO OUT
AUDIO OUT(2CH)
AUDIO OUT
(5.1CH)
VIDEO OUT
AV receiver MULTI-
CH. INPUTS
S
L
R
L
R
P R
P B Y
COAXIAL
OPTICAL FRONT SURROND
SUB
WOOFER
CENTER DIGITAL
UDIO OUT
COMPONENT VIDEO OUT
AUDIO OUT(2CH)
AUDIO OUT
(5.1CH)
VIDEO OUT
AV receiver AUDIO/
VIDEO IN
DV563.book 17 ページ ２００３年４月２５日 金曜日 午後８時１１分