Pioneer DV-667A-S - Manual (Page 85)

Additional information 10
85
En
• Static electricity or other external
influences may cause malfunctioning of
this unit. In this case, unplug the power
cord and then plug back in. This will
usually reset the unit for proper operation.
If this does not correct the problem,
please consult your nearest Pioneer
service center.
The audio recorded on a
Super VCD disc is not
output properly. •If the audio is switched to [2] when playing a Super VCD that
contains only one stereo soundtrack, there may be no sound at all.
Press
AUDIO to change the soundtrack.
Can’t hear effect of
TruSurround • TruSurround does not work with DTS, DVD-Audio, SACD or 96kHz
linear PCM DVD.
• The TruSurround effect is only output through the
AUDIO OUT
(2ch) analog audio outputs.
• Make sure that Audio Output Mode is set to 2 Channel ( page 66 ).
• The effectiveness of TruSurround varies with the disc.
Problem Remedy
DV563.book 85 ページ ２００３年４月２５日 金曜日 午後８時１１分