Basic playback controls, Getting started 04 – Pioneer DV-667A-S User Manual

Page 31

Advertising
background image

Getting started

04

31

En

• My AV receiver is definitely compatible with

96/88.2kHz Linear PCM audio, but it
doesn’t seem to work with this player.
What’s wrong?

For digital copy-protection purposes,
some 96/88.2kHz DVD discs only output
digital audio downsampled to 48/44.1kHz.
This is not a malfunction.

To fully take advantage of the high
sampling rate audio, connect the analog
audio outputs to your amplifier/receiver.

• Why can’t I hear SACD audio through the

digital outputs?

SACD audio is only available through the
analog outputs. This is not a malfunction.
Some DVD-Audio discs too only output
audio through the analog outputs.

• Is it better to listen to DVD-Audio discs

through the analog outputs?

Some DVD-Audio discs do not output
anything through the digital outputs, and
multichannel discs are downmixed to
stereo for the digital output. In addition,
high sampling rate DVD-Audio discs
(higher than 96kHz) automatically down-
sample audio output from the digital
outputs.

Using the multichannel analog audio
outputs for DVD-Audio have none of these
limitations.

• My DVD-Audio disc starts playing, but then

suddenly stops!

The disc may have been illegally copied.

Basic playback controls

The table below shows the basic controls on
the remote for playing discs. The following
chapter covers more playback features in
more detail.

Button

What it does

Starts playback.
DVD and Video CD: If the display
shows

RESUME

or

LAST MEM

playback starts from the resume or
last memory point (see also

Resume and Last Memory

below.)

Pauses a disc that’s playing, or
restarts a paused disc.

Stops playback.
DVD and Video CD: Display shows

RESUME

. Press

(stop) again to

cancel the resume function. (See
also

Resume and Last Memory

below.)

Press to start fast reverse scan-
ning. Press

(play) to resume

normal playback.

Press to start fast forward scan-
ning. Press

(play) to resume

normal playback.

Skips to the start of the current
track or chapter, then to previous
tracks/chapters.

Skips to the next track or chapter.

Numbers

Use to enter a title/track number.
Press

ENTER

to select (or wait a

few seconds).
• If the disc is stopped, playback
starts from the selected title (for
DVD) or track number (for CD/
SACD/Video CD/Super VCD/MP3 ).
• If the disc is playing, playback
jumps to the start of the selected
chapter or track (within the cur-
rent group for DVD-Audio).

DV563.book 31 ページ 2003年4月25日 金曜日 午後8時11分

Advertising
This manual is related to the following products: