Palm TREOTM 650 - Manual (Page 129)

Beaming information :: 127
Beaming information
Your Treo is equipped with an IR (infrared) port that lets you beam information to
another Palm Powered device with an IR port. The IR port is located on the top of your
Treo, between the antenna and the ringer switch, behind the small dark shield.
Beaming a record
1. Select the entry or category you want to beam. If a lock appears next to the
item, it can’t be beamed.
2. Open the menus .
3. Select Record, and then select one of the following:
• Beam: Sends an individual record.
• Beam Category: Sends all entries in the current category.
4. When the Beam Status dialog box appears, point the IR port on your Treo directly
at the IR port of the receiving device.
5. Wait for the Beam Status dialog box to indicate that the transfer is complete
before you continue using your Treo.
You can store a beamed
application on your phone,
or send it to an expansion
card inserted in the
expansion card slot.
Beam your business card
in two key presses: From
the Main View in the Phone
application, open the
menus, and then press M.
If you beam a bookmark or
saved page from the Web
browser, it beams the URL,
not the contents of that
page.
RowdyUG.book Page 127 Tuesday, December 7, 2004 9:58 AM