Palm TREOTM 650 - Manual (Page 172)

170 :: Replacing the battery
Replacing the battery
Your Treo 650 comes with a replaceable battery. Be sure to use a replacement
battery that is compatible with Treo 650.
1. Press Power/End to turn off the screen.
2. Press the Battery Door Release button and slide the battery door downward
to remove it from your Treo.
3. Place a finger in the notch between the stylus and the battery and lift the
battery up at a 45 degree angle.
4. Align the metal contacts on the battery with the contacts inside the battery
compartment.
5. Insert the battery into the compartment at a 45 degree angle, pressing it into
place. Slide the battery door onto the back of the phone until it clicks into place.
6. Wait for your Treo to turn on, and then enable the network time or set the date
and time when prompted.
Be sure to dispose of your
old battery properly. In
some areas, disposal in
household or business
trash is prohibited.
A
B
C
D
A. Battery Door Release button
B. Battery contacts
C. Notch
D. Phone contacts
RowdyUG.book Page 170 Tuesday, December 7, 2004 9:58 AM