Palm TREOTM 650 - Manual (Page 17)

Turning Treo on and off :: 15
Turning Treo on and off
You can use the Palm OS ® features of your Treo 650 smartphone independently
of the wireless features and applications. In other words, the screen and phone are
designed to be turned off and on separately.
Turning your phone on and off
When you turn on your Treo, it connects to a mobile network so that you can make
and receive phone calls and use other wireless services.
1. Press and hold Power/End to turn on your phone. If Sound Mode is on you’ll
hear a series of ascending tones. (See “Setting the ringer switch” on page 146 for
more on Sound Mode.) After your phone locates a signal, you can use the phone
and Internet features (if supported by the local network).
2. Press and hold Power/End again to turn off your phone. If Sound Mode is on
you‘ll hear a series of descending tones. When your phone is off, your Treo is not
connected to any mobile network. You can still use the organizer and other Palm
OS features. This is ideal for airplane flights and for maximizing battery life.
Waking up the screen
To use the Palm OS features when your phone is off, you need to wake up the screen.
You can also turn off your phone’s screen without turning off your phone’s wireless
features.
1. Press Power/End to wake up the screen.
2. Briefly press Power/End to turn off the screen.
The indicator light flashes
green when your phone is
on and you’re inside a
coverage area. If you’re
outside a coverage area,
the indicator light flashes
amber.
Your Treo 650 includes a
keyboard backlight for low-
light conditions. The
keyboard backlight
activates automatically
when the screen turns on.
It turns off automatically
when the screen turns off
and when an active call
lasts longer than a minute.
You can also press any
application buttons on the
front of your phone to wake
up the screen and go
directly to the application
linked to that button.
RowdyUG.book Page 15 Tuesday, December 7, 2004 9:58 AM