Palm TREOTM 650 - Manual (Page 13)

Installing the battery :: 11
Installing the battery
1. Press the Battery Door Release button and slide the battery door downward to
remove it from your Treo.
2. Align the metal contacts on the battery with the contacts inside the battery
compartment.
3. Insert the battery into the compartment at a 45 degree angle and then press
it into place.
4. Slide the battery door onto the back of the phone until it clicks into place.
5. When the Welcome screen appears, follow the onscreen instructions to set up
your Treo 650.
A
B
C
D
A. Battery Door Release button
B. Battery
contacts
C. Notch
D. Phone
contacts
RowdyUG.book Page 11 Tuesday, December 7, 2004 9:58 AM