POSIFLEX Business Machines PP7700 Series User Manual
Page 14
2 - 4
2.
At the host system that the Dongle is connected, be sure to
terminate any application program or to uninstall any driver
occupying the COM port that the Dongle is connected. Select
the proper COM port if requested by the installation program.
If there are multiple Dongles installed on several COM ports
in the host, you have to free all COM ports to be used for
wireless connection before driver installation and select the
COM ports used one by one if requested in the installation
program. Reboot system after installation complete. Detail
illustrations are as below.
First copy or decompress the drivers to a subfolder in the host
system where Dongle DG2000 is attached. Then in the host
system click “Start” --> “Settings” --> “Control Panel” -->
“System” –> “Hardware” –“Device Manager” --> “COM & LPT”.
Click the right button of mouse at the COM port that DG2000 is
attached and select “Update Driver” as below.